Operation Manual

490 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Providers and PBXs
Configuring the Evaluation of Incoming SIP Messages
10. In the Method of evaluation list field, select the Standard (use From headers as
screened number option.
11. Check the settings using incoming exchange line calls e.g. with the mobile phone and
display in the caller list (Message key > Caller list).
12. If the number presentation does not function satisfactorily, repeat steps 2 to 6.
13. In the Method of evaluation list field, select the As described in RFC3325 option.
14. Check the settings using incoming exchange line calls e.g. with the mobile phone and
display in the caller list (Message key > Caller list).
15. If number presentation does not function satisfactorily, record an incoming call and
examine it with the Wireshark programme.
16. Repeat steps 2 to 6.
17. In the Method of evaluation list field, select the User-defined option.
18. Configure the settings you want.
Notes:
The telephone number to be evaluated should preferably be canonical
(+445306.... or 00445306…). Otherwise it is not used for evaluation.
The designations used for the settings match the designations used in
Wireshark.
Network Provided Number: Network-verified incoming telephone number:
The sequence entered in the invite is searched for the telephone number
which can be analysed.
User Provided Number: Non-verified incoming telephone number (corre-
sponds to CLIP no screening): The sequence entered in the invite is
searched for the telephone number which can be analysed. Optional: is not
transferred by all providers.
User Provided Name: Caller's name in plain text. Optional: is not trans-
ferred by all providers.