Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 491

Settings

Providers and PBXs

Configuring the Presentation of Subscriber Numbers (Outgoing)

You need to input the following information to ensure that the telephone transfers the data

(e.g. the called telephone number, its own telephone number) to the provider in the correct

format:

• Format of called party number: Format, in which the provider requires the telephone

number of the called party number to transfer the call.

Note: The telephone automatically converts called telephone numbers into

this format when it makes calls via the provider. If you dial a number without

a prefix, the local area code therefore applies (Settings > Accounts >

Country and local area code).

• Format of own telephone number: Format in which your own telephone number, that is

to be transmitted, is to be supplied to the provider.

Note: Your own telephone number is automatically converted into the

selected format. If you have entered your own telephone numbers in the

telephone without prefixes, the local area code applies to them during

conversion (Settings > Accounts > Country and area code).

• Method for calling line identity restriction: Calling line identity restriction by the provider

with or without display text.

• Manner of number presentation: Range in which the provider expects to receive

telephone numbers from the telephone.

Important: If you are using an Auerswald PBX, the PBX specifies how

subscriber numbers are presented. The PBX overwrites manual settings.

You can configure the presentation of subscriber numbers as follows:

• Separately for the provider or PBX

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Configure the Presentation of Subscriber Numbers

(Outgoing)

1. Open the Settings > Providers & PBXs screen.