Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 495
Settings
Providers and PBXs
Configuring the Network Interface Type
10. Tap on Manner of number presentation.
11. In the Manner of number presentation list field, select one of the following options:
Notes: The Custom option requires additional settings:
From
Settings for setting up the "From" header.
P-Asserted-Identity
Settings for setting up the P-Asserted-Identity" header.
P-Preferred-Identity
Settings for setting up the "P-Preferred-Identity" header.
Configuring the Network Interface Type
Setting the network interface type allows you to operate the telephone on different networks,
for example, VLANs or VPNs.
You can configure the network interface type as follows:
• Separately for the provider or PBX
Anonymous: If calling line identity restriction is enabled, the display text
"anonymous" is sent to the called telephone number by the provider.
User Anonymous: If calling line identity restriction is enabled, the display text
"user anonymous" is sent to the called telephone number by the provider.
In the display text: Your own external telephone number, which is to be trans-
mitted to the called telephone number, is transferred to the provider in the
"Display text" field.
In the username: Your own external telephone number, which is to be trans-
mitted to the called telephone number, is transferred to the provider in the
"Username" field.
As described in RFC3325 with P-Asserted-Identity: Your own external
telephone number, which is to be transmitted to the called telephone number,
is transferred to the provider in the "P-Asserted-Identity" field.
As described in RFC3325 with P-Preferred-Identity: Your own external
telephone number, which is to be transmitted to the called telephone number,
is transferred to the provider in the "P-Preferred-Identity" field.
Custom: Uses user-defined settings for number presentation.