Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 503

Settings

Accounts

Selecting a Provider/PBX

You can set up accounts with different providers/PBXs and then select them.

You can use the telephone or configuration manager to create profiles for providers/PBXs as

described below:

• Under Settings > Providers & PBXs > New Provider/PBX (see section Settings >

Providers & PBXs).

• Under Settings > Accounts > Account overview > Account name > Providers & PBXs

> New Provider/PBX.

Note: Some providers/PBXs are already pre-configured in the factory

settings. In total you can configure up to 10 providers/PBXs.

You can select providers/PBXs as follows:

• Separately for each account

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Select a Provider/PBX

Requirements:

– At least one provider/PBX profile has already been set up

1. Open the Settings > Accounts screen.

2. In the line that contains the required account, click Configure.

3. Under Account settings, open the Providers & PBXs list field.

4. Select the required provider/PBX.

Note: To create new providers/PBXs and their profiles, open the Settings >

Providers & PBXs screen.

Further steps:

– Make further settings on the configuration screen.

– Save your settings before you leave the screen.