Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 505
Settings
Accounts
Enabling/Disabling Use as a System Telephone
To operate this as an Auerswald system telephone, you require one of the following Auerswald
PBXs:
• COMpact 5010 VoIP
• COMpact 5020 VoIP
• COMpact 5000/R
• COMmander 6000/R/RX
Important:
You can enable or disable use as a system telephone as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enable Use as a System Telephone
Requirements:
– Connection to one of the following Auerswald PBXs: COMpact 5010 VoIP, COMpact 5020
VoIP with firmware version 4.2E or higher, COMpact 5000/R with firmware version 6.2A or
higher, COMmander 6000/R/RX with firmware version 6.0C or higher
1. Open the Settings > Accounts screen.
2. In the line that contains the required account, click Configure.
3. Under Account settings, select or clear the Auerswald system telephone check
box.
The current account status is displayed in the Account overview and appears in the
Account settings dialogue like this:
To support the system telephone, the PBX needs at least the following
firmware versions:
• COMpact 5010 VoIP, COMpact 5020 VoIP: 4.2E
• COMpact 5000/R: 6.2A
• COMmander 6000/R/RX: 6.0C
Enables use as a system telephone.
Disables use as a system telephone.
Auerswald system telephony enabled.
Auerswald system telephony disabled.