Operation Manual

508 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Entering a User Name for the Account
The Default account (standard) setting is shown in grey to show that the account is
now to be used by default. Its use as the default account can only be disabled by
enabling a different account as the default account.
Further steps:
– Make further settings.
Entering a User Name for the Account
Your VoIP provider will supply you with your user name along with all the other data you require
to access your account. If your telephone is connected to an Auerswald PBX, the username
entered when configuring the PBX is the same as the telephone's internal telephone number
(MSN).
You can enter a user name as follows:
• Separately for each account
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter a Username for the Account
Requirements:
– You need to know the internal telephone number for the telephone entered in the PBX config-
uration, or the user name assigned by the VoIP provider
1. Open the Settings > Accounts screen.
2. In the line that contains the required account, click Configure.
3. Under Account settings, enter the user name (the internal telephone number regis-
tered in the PBX or the user name assigned by the VoIP provider) in the Username
entry field. Possible entries:
Further steps:
This account will then be used as the default account.
To use this account, it has to be selected manually.
Up to 64 digits
Numbers and characters