Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 511

Settings

Accounts

Entering an Authentication ID

The authentication ID (authentication identification) is assigned by some VoIP providers when

you set up an account. You need this ID to enable you to access the account.

However, if your VoIP provider did not issue you with an authentication ID, or if your telephone

is connected directly to an Auerswald PBX, simply leave this field empty.

You can enter the authentication ID as follows:

• Separately for each account

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Enter an Authentication ID

Requirements:

– You need to know the Authentication ID assigned by the VoIP provider, if required

1. Open the Settings > Accounts screen.

2. In the line that contains the required account, click Configure.

3. Under Account settings, enter the authentication ID in the Authentication ID entry

field. Possible entries:

Note: You can only input the authentication ID if you have been assigned one

by your VoIP provider.

Further steps:

– Make further settings on the configuration screen.

– Save your settings before you leave the screen.

Using the Telephone to Enter an Authentication ID

Requirements:

– You need to know the Authentication ID assigned by the VoIP provider, if required

Up to 64 digits

Numbers and characters