Operation Manual

512 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Entering the Country and Local Area Code
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on Authentication ID and then enter the Authentication ID in the relevant entry
field. Possible entries:
Note: You can only input the authentication ID if you have been assigned one
by your VoIP provider.
4. Tap on OK.
Further steps:
– Make further settings.
Entering the Country and Local Area Code
If your telephone is not connected to a PBX as a system telephone, you must enter the country
and local area code of your PBX's location or the country and local area code of the VoIP
telephone number assigned by your VoIP provider when you set up your account.
Note: The country and area code of this account are replaced by the prefixes
stored in the PBX as soon as the use of this telephone as a system telephone
on an Auerswald PBX is enabled.
You can enter a country code and area code as follows:
• Separately for each account
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Enter a Country and Local Area Code
Requirements:
– Use as system telephone not enabled
Up to 64 digits
Numbers and characters