Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 513
Settings
Accounts
Entering the Country and Local Area Code
1. Open the Settings > Accounts screen.
2. In the line that contains the required account, click Configure.
3. Under Country and area code, enter the local area code of your PBX site or the VoIP
telephone number (with 0) assigned to it by the VoIP provider in the Area code entry
field. Possible entries:
4. Open the Country list field and select a country from the list.
The prefix of the selected country is displayed in the Country prefix field.
Note: You can also enter the country code directly in the Country code field
(with 00, and a maximum of six digits). However, this entry is overwritten as
soon as you select a different country.
Further steps:
– Make further settings on the configuration screen.
– Save your settings before you leave the screen.
Using the Telephone to Enter a Country and Local Area Code
Requirements:
– Use as system telephone not enabled
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on Country and area code.
4. Tap on Area code and then enter the local area code for the location of your PBX, or
the VoIP telephone number assigned by your VoIP provider (with 0), in the entry field.
Possible entries:
5. Tap on Country and then select a country from the list.
The prefix of the selected country is displayed in the Country prefix field.
Up to 12 digits
Numbers
Up to 12 digits
Numbers