Operation Manual

516 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Entering Telephone Numbers
2. In the line that contains the required account, click Configure.
3. Under Account settings, enter the DDI main telephone number assigned by your
VoIP provider. in the DDI main number entry field. e.g. 92 00, without a prefix.
Possible entries:
Further steps:
– Make further settings on the configuration screen.
– Save your settings before you leave the screen.
Using the Telephone to Enter the DDI Main Number
Requirements:
– Set connection type SIP-Trunking
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on DDI main number and then enter the DDI main number assigned by your
VoIP provider, e.g. 92 00, without a prefix. Possible entries:
Further steps:
– Make further settings.
Entering Telephone Numbers
Depending on whether you have selected Standard connection or SIP trunking as the
connection type, this is where you input the internal telephone numbers (MSNs) or the exten-
sions (DDIs) of your telephone. You can also assign every telephone number its own ring tone.
You can enter telephone numbers as follows:
• Separately for each account
• Using the configuration manager
Up to 40 digits
Numbers
Up to 40 digits
Numbers