Operation Manual

518 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Accounts
Entering Telephone Numbers
Using the Telephone to Enter Telephone Numbers
1. Tap on Apps > Settings > Accounts.
2. In the Account overview, tap on the required account.
3. Tap on Subscriber numbers.
4. Tap on New number.
5. Tap on Number and then enter the telephone number without prefixes in the entry
field. (internal telephone number (MSN) for the default connection, DDI or MSN for
SIP trunking). Possible entries:
6. Tap on OK.
7. Tap on Name and then enter a name for the telephone number in the entry field.
Possible entries:
8. Tap on OK.
9. Select or clear the Default subscriber number check box.
10. Tap Subscriber number type (only active if the selected connection type is SIP
trunking).
Note: If you have selected the SIP Trunking connection type, you must
specify here whether the telephone number involved is the extension (DDI)
to the DDI main number, or a multiple subscriber telephone number (MSN)
adopted from an earlier ISDN connection to the VoIP connection.
11. Select the subscriber number type.
12. Tap on Ringtone.
13. Select the ringtone you want to use from the Ringtone list field.
14. Tap on OK.
Up to 40 digits
Numbers
Up to 64 digits
Numbers and characters
Telephone number is used as the default for outgoing calls.
Telephone number is not used as the default number.