Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 521

Settings

Accounts

Configuring the Voice Mailbox (SIP Account)

To use the voice mailbox functions of a standard VoIP account you must make the settings

specified by the VoIP provider. With these settings you can, for example, use the Message

Waiting Indication (MWI) to monitor the voice mailbox's status and see the status from the LEDs

on the message key.

Note: The voice mailbox (SIP account) is only available on the PBXs

COMpact 4000, COMpact 5000/R and COMmander 6000/R/RX (as of PBX

firmware version 6.4A

You can configure a voice mailbox as follows:

• Separately for each account

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Configure the Voice Mailbox

1. Open the Settings > Accounts screen.

2. In the line that contains the required account, click Configure.

3. Select the tab Voice mailboxes.

4. Click New.

5. Tap on Voice mailbox name and enter the name of the voice mailbox in the relevant

entry field. Possible entries:

6. Tap on Voice mailbox number and enter the voice mailbox's telephone number in

the relevant entry field. Possible entries:

Note: Each status message is assigned a telephone number to enable you

to identify the associated voice mailbox. You must enter the a telephone

number to ensure that the status message is uniquely assigned to a single

Up to 64 digits

Numbers and characters

Up to 40 digits

Numbers and the characters * and #