Operation Manual

556 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Sound
Switching Headset Ringing On/Off
1. Tap on Apps > Settings > Device > Sound > More.
2. Tap on Maximum gain handset micro.
3. Tap on the slider and then drag the handle to the required position.
4. Tap on OK.
Switching Headset Ringing On/Off
If you are using a headset (headset switched on), three types of call signalling are possible:
1. Ringing through the loudspeaker (as for receiver operation)
2. Ringing through the loudspeaker + a short attention tone on the headset
3. Short attention tone on the headset
In the 2nd and 3rd operating modes, switch on headset ringing as described here. In the 3nd
operating mode, you must also switch off the ringtone.
You can switch headset ringing on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Headset Ringing On/Off
1. Open the Settings > Device > Sound screen.
2. Under Settings for tones, select or deselect the Headset ringing check box.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Headset Ringing On/Off
1. Tap on Apps > Settings > Device > Sound > More.
Switches headset ringing on.
Switches headset ringing off.