Operation Manual

560 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Sound
Switching the Ringtone On/Off
5. Tap on OK.
6. Tap on Ringtone and select the ringtone you want to use from the list field.
7. Tap on OK.
Switching the Ringtone On/Off
If the ringtone is switched on, you hear a sound signal when a phone call is received. If you
don't want to be disturbed by the ringer on the telephone, you can switch off the ringtone.
The difference between this function and the do-not-disturb function on the PBX is that you can
still receive phone calls here. However, you are not notified about calls with an audible ringtone,
just a visual display.
You can switch the ringtone on or off as follows:
• Using the telephone
To switch a ringtone on or off, press the function key that has been configured for the ringtone.
Alternatively:
1. Tap on Apps > Functions > Ringtone.
2. In the Operation list field, select one of the following options:
3. Tap on Execute.
Configuring and Operating a Function Key for the Ringtone
Press the key to switch the ringtone on or off or to change it.
Press the key during an incoming call to switch the ringtone on or off for this call or to switch it
over.
Up to 40 digits
Numbers and the characters * and #
switch on: Enables the ringtone.
switch off: Disables the ringtone.