Operation Manual

564 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Display and LEDs
Setting the Brightness of the Display
Display and LEDs
You can configure the telephone to suit the needs of the user by setting the display.
Setting the Brightness of the Display
You can customise the display screen's brightness.
COMfortel 3600 IP: If the automatic brightness adjustment function is switched on, the
brightness sensor is used to adjust the display lighting to the brightness of the telephone's
surroundings.
Note: Under Apps > Settings > Device > Display > More you
can specify that the display is completely switched off in power save mode.
You can set the brightness of the display screen as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Set the Brightness of the Display
1. Open the Settings > Device > Display screen.
2. Only COMfortel 3600 IP: Select or clear the Automatic brightness check box.
If you have disabled the automatic brightness adjustment function, the slider is activ.
3. Under Brightness, click on the slider and set the required level of brightness.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Set the Brightness of the Display
1. Tap on Apps > Settings > Device > Display > Brightness.
Switches the automatic brightness adjustment function on.
Switches the automatic brightness adjustment function off.