Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 577

Settings

Display and LEDs

Setting the Sensitivity of the Proximity Sensors (only COMfortel 3600 IP)

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Configure the Display LED

1. Tap on Apps > Settings > Device > Display > More.

2. Under LED settings, tap on Display LED and select one of the following options from

the list field:

Setting the Sensitivity of the Proximity Sensors (only COMfortel 3600 IP)

The proximity sensors detect for example user proximity or a motion in front of the telephone.

You can configure the sensitivity of the proximity sensors as follows:

• Using the telephone

1. Tap on Apps > Settings > Device > Display > More > Proximity sensor.

2. Tap on the slider and set the required sensitivity.

You can tell which proximity range you are currently located in by the colour of the two

stars.

• Both stars grey: You are currently outside the proximity range.

Show alerting and calls: Indicates the status of the call.

Show alerting, calls and headset activation: Indicates the status of the call

and the headset activation (only COMfortel 3600 IP).

Show alerting, calls and new messages: Indicates the status of the call and