Operation Manual

582 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Emergency Numbers
Configuring Emergency Call Numbers
Emergency Numbers
You can still make emergency calls, even if you have enabled the screen lock (by dialling the
emergency call numbers saved in the telephone/PBX).
Configuring Emergency Call Numbers
You can store up to 10 additional emergency call numbers on your telephone, in addition to the
emergency call numbers entered in the PBX.
Note: The emergency call numbers you set up in the telephone are not
synchronised with the PBX's telephone book.
You can configure emergency numbers as follows:
• Using the telephone
1. Tap on Apps > Settings > Auerswald > More > Emergency numbers.
2. Tap on the name of an emergency call number.
A dialogue with the entries for the emergency call numbers is displayed.
3. Tap on Emergency call number and enter the telephone number in the entry field.
Possible entries:
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. In the factory settings, the PBX's exchange line access
number is "0", but it can be changed in some PBXs (refer to the instructions
for the PBX).
4. Tap on OK.
5. Tap on Emergency call number name and enter the name of the telephone number
in the entry field. Possible entries:
Up to 40 digits
Numbers and the characters * and #