Operation Manual

584 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Location
Configuring the Location
Location
Some apps and web pages need the location of the telephone (GPS co-ordinates) to enable
them to execute location-related functions.
To use these functions, even without a GPS receiver, you can set the location in the telephone
and allow the access to the location data.
Configuring the Location
You can configure the location as follows:
• Using the configuration manager
• Using the telephone
Using the Telephone to Configure the Location
1. Tap on Apps > Settings > Auerswald > More > My Location.
2. To allow apps access to the location data, enable the Access to my location switch.
3. Tap on Latitude and enter the GPS co-ordinates in the entry field. Possible entries:
Note: You can find out your exact location from the relevant Internet sites or
with a GPS receiver or smart phone.
4. Tap on OK.
5. Tap on Longitude and enter the GPS coordinates in the relevant entry field. Possible
entries:
6. Tap on OK.
7. Tap on Altitude and enter the altitude in the relevant entry field. Possible entries:
8. Tap on OK.
GPS coordinates in decimal places (example: 52.271598)
GPS coordinates in decimal places (example: 10.685660)
Height above ground in m (example: 142)