Operation Manual

586 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
IP Camera
Configuring an IP Camera
IP Camera
The telephone supports the connection of IP cameras, for example for monitoring and
controlling door stations.
Note: A fee is charged for activating the IP camera at the Auerswald Upgrade
Center (see Service and Maintenance > Extending the Telephone section).
You can display an IP camera as follows:
• In the IP camera app
• Automatically in the telephony app, as soon as you receive a call from a contact linked with
the IP camera or call the contact yourself
By sending DTMF signals you can open a door and switch on the accompanying stairwell light
(connection between the IP camera and a door station in the telephone book).
Configuring an IP Camera
To configure an IP camera, you must make the following settings:
• Name
• IP address
• Username
• Password
If necessary, you can also make additional setting, such as, picture scaling or the image
frequency.
Important: The telephone only supports IP cameras which send single
images in *.jpg file format directly via a static IP address/URL. It does not
support IP cameras that are embedded in web pages, dynamic IP addresses/
URLs (e.g. via JavaScript) and streaming formats.
You can configure an IP camera as follows:
• Using the configuration manager
• Using the telephone