Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 591
Settings
IP Camera
Configuring Picture Scaling
2. Tap on the name of the IP camera.
3. Select or clear the Fullscreen check box.
Configuring Picture Scaling
You can configure picture scaling for the IP camera to enlarge or reduce the image that is
displayed.
You can configure picture scaling as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure Picture Scaling
1. Open the Settings > Auerswald > IP camera screen.
2. In the line containing the required IP camera, click Configure.
3. Enter the picture scaling you want to use in the Picture scaling in % entry field.
Possible entries:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure Picture Scaling
1. Tap on Apps > Settings > Auerswald > More > IP camera.
2. Tap on the name of the IP camera.
3. Tap on Image scale in % and then enter the required picture scaling in the entry field.
Possible entries:
Switches on full screen mode.
Switches off full screen mode.
10 (reduced) to 400 (greatly enlarged)
10 (reduced) to 400 (greatly enlarged)