Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 597
Settings
IP Camera
Configuring the IP Camera Control
Note: You must make a number of camera-specific settings before you can
use your telephone to control the IP (see PTZ interface documentation for the
IP camera).
You can configure IP camera control as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure IP Camera Control
1. Open the Settings > Auerswald > IP camera screen.
2. In the line containing the required IP camera, click Configure.
3. Enter the required settings in the entry fields under IP camera control:
Further steps:
Left: If the user presses the directional pad on the left, the IP camera moves to
the left.
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?move=left
Right: If the user presses the directional pad on the right, the IP camera moves
to the right.
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?move=right
Up: If the user presses the top of the directional pad, the IP camera moves up.
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?move=up
Down: If the user presses the bottom of the directional pad, the IP camera
moves down.
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?move=down
Zoom in: Enlarges the screen window when you press the plus key (zoom in).
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?zoom=9999
Zoom out: Reduces the screen window when you press the minus key (zoom
out).
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?zoom=1
OK key: If the user presses the OK key on the directional pad, the IP camera
moves to a preset position.
Example: http://root:pass@192.168.0.240/cam-cgi/com/ptz.cgi?gotoserverpre-
setno=1