Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 601
Settings
IP Camera
Configuring the Function Key for an IP Camera
6. Tap on IP camera.
7. In the IP camera list field, select the required IP camera.
8. Only for a link to a door station: Tap on DTMF signal door and enter the DTMF signal
for opening the door in the entry field. Possible entries:
9. Tap on OK.
10. Only for a link to a door station: Tap on DTMF signal light and enter the DTMF signal
for turning on the stairwell light in the entry field. Possible entries:
11. Tap on OK.
Note: When you receive a door call, tap on to open the door and tap
on to switch on the stairwell light.
Configuring the Function Key for an IP Camera
Press the key to start an app to display the IP camera.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for an IP camera as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for an IP Camera
1. Open the Apps > Function keys screen.
Numbers and the characters * and #
Numbers and the characters * and #
LED signalling on the key:
green The IP camera app is switched on.
off The IP camera app is switched off.