Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 603
Settings
IP Camera
Configuring the Function Key for an IP Camera
Using the Telephone to Configure a Function Key for an IP Camera
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on IP camera.
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the IP camera list field, select the required IP camera.
7. Tap on Assign.
8. Tap on Exit.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters