Operation Manual

624 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Date and Time
Switching Automatic Update of the Phone Time over the Network On/Off
Switching Automatic Update of the Phone Time over the Network On/Off
If you have input a time server (NTP server) address and enabled the automatic time update
function, the telephone accesses the exact time from the Internet. This means you no longer
need to correct the time manually.
You can switch automatic update of the phone time over the network on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Automatic Update of the Phone Time over
the Network On/Off
1. Open the Settings > System > Date & Time screen.
2. Select or clear the NTP (Network Time Protocol) check box.
3. In the NTP server entry field, enter the IP address of a time server.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch Automatic Update of the Phone Time over the Network
On/Off
1. Tap on Apps > Settings > System > Date & Time.
2. Select or clear the NTP (Network Time Protocol) check box.
The Time server (NTP server) setting is displayed.
3. Tap on Time server (NTP server) and then enter the IP address of a time server in
the entry field.
4. Tap on OK.
Switches the automatic synchronising of the phone time on.
Switches the automatic synchronising of the phone time off.
Switches the automatic synchronising of the phone time on.
Switches the automatic synchronising of the phone time off.