Operation Manual

626 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Settings
Date and Time
Configuring the Date Format
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch 24-hour Format On/Off
1. Open the Settings > System > Date & Time screen.
2. Select or clear the Use 24-hour format check box.
3. If you have deselected the 24-hour format check box, then, in the Time list field, also
select the AM option for in the morning, or PM for in the afternoon, to specify whether
the time is to apply in the morning or in the afternoon.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Switch 24-hour Format On/Off
1. Tap on Apps > Settings > System > Date & Time.
2. Select or clear the Use 24-hour format check box.
If you have cleared the Use 24-hour format and NTP (Network Time Protocol)
check boxes, the PM and AM buttons are displayed under ?Time.
3. Under Time you can then specify whether the time is in the morning or in the
afternoon.
4. Tap on Save.
Configuring the Date Format
You can display the date in a number of different formats.
You can configure the date format as follows:
Switches 24-hour format on.
Switches 24-hour format off.
Switches 24-hour format on.
Switches 24-hour format off.