Operation Manual

634 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Update and Provisioning
Update and Provisioning Variants
Update and Provisioning
Update
An update involves installing a new version of the firmware to solve problems and integrate new
features. Here, the device sets up a connection with an update server, over which it receives
the latest firmware. (The settings on the device remain unchanged.) Except for the charges for
the required server connection, the update is free of charge.
Provisioning
Provisioning involves the automated configuration of the telephone from a provisioning server.
Here, the device sets up a connection with a provisioning server, over which it receives the
necessary configuration data. Following that the firmware is updated.
Note: You will find further information about the provisioning process on the
Internet (see www.auerswald.de/service under Developer.)
Update and Provisioning Variants
There are several different ways to perform an update or provisioning. These vary as follows:
Manual update
If a manual update is performed, a firmware file (*.rom) is loaded into the telephone from the
configuration manager or an SD card, enabling the new firmware to be saved to the telephone.
After you perform the update you must reboot the telephone.
Automatic update from update server
In the case of an automatic update from the update server, a regular (e.g. weekly) automatic
update can be configured. You can set the weekday and time.
Automatic provisioning
In the case of automatic provisioning from the provisioning server, regular (e.g. weekly)
automatic provisioning can be configured. You can set the weekday and time.
There are several different ways to perform an automatic provisioning. These vary as follows:
• Provisioning with DHCP data
• Provisioning via the redirect server