Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 635
Service and Maintenance
Update and Provisioning
Triggering a Manual Update
• Provisioning via a set provisioning server
Triggering a Manual Update
If no update server is available, you can trigger an update by loading a firmware file onto the
telephone from your hard disk or from an SD card.
Note: The automatic installation of updates is switched off when you perform
a manual update. You can switch the automatic installation of updates on
again under Apps > Settings > System > Update & provi-
sioning > Automatic update.
You can initiate a manual update as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Trigger a Manual Update
Requirements:
– Firmware file (*.rom) saved on the hard disk
– SD card inserted into slot (min 128 MB of free memory )
Notes:
You will find the required firmware file on the Internet (see
www.auerswald.de/service).
To get information about the firmware version that is currently saved in the
telephone, select Apps > Settings > System > About phone
or, in the configuration manager, click on the Auerswald logo with the left-
hand mouse button.
1. Open the Settings > System > Update & provisioning > Update screen.
2. Under Manual update, click Search.
A file selection dialogue opens.