Operation Manual

638 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Update and Provisioning
Switching Automatic Provisioning On/Off
3. Under Schedule, select or clear the check box for the planned weekdays.
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Configure the Schedule for Updates and Provisioning
1. Tap on Apps > Settings > System > Update & provisioning.
2. Under Time Schedule, tap on Planned weekdays.
3. Select or clear the check box for the planned weekdays.
4. Tap on OK.
5. Under Schedule, tap on the Time entry field, and then enter the required time.
Possible entries:
6. Tap on Done.
Switching Automatic Provisioning On/Off
During automatic provisioning the configuration data is automatically loaded onto the telephone
from the provisioning server, at the set point in time. The system then checks if a new firmware
update is available on the update server. If an update is available, the new firmware is also
loaded into the telephone if the automatic installation of updates is selected.
Time using the format hh:mm
00 to 24: Hours ("hh")
00 to 59: Minutes ("mm")
Switches on automatic update and provisioning for this weekday.
Switches off automatic update and provisioning for this weekday.
Switches on automatic update and provisioning for this weekday.
Switches off automatic update and provisioning for this weekday.
Time using the format hh:mm
00 to 23: Hours ("hh")
00 to 59: Minutes ("mm")