Operation Manual

646 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Update and Provisioning
Configuring Automatic Update via the Update Server
Further steps:
– Save your settings before you leave the screen.
– After a firmware update you usually require a new version of the instructions. You will find up-
to-date instructions on the Internet (see www.auerswald.de).
– In order to use the new features after the telephone's firmware has been updated, you often
may need to update the PBX firmware (see PBX operation instructions).
Using the Telephone to Automatically Perform an Update via the Update Server
Requirements:
– The PBX or telephone must be connected to a broadband Internet connection
– The address of the DNS server must be entered in Apps > Settings > Network >
Network
– The set schedule must be entered under Apps > Settings > System > Update
& provisioning
– The update server's address must be entered under Apps > Settings > System >
Update & provisioning > Automatic update
– When the automatic update is performed: SD card inserted into slot (min. 128 MB of free
memory )
1. Tap on Apps > Settings > System > Update & provisioning.
2. Select or clear the Check for updates check box under Automatic update.
Note: If only the Check for updates check box is selected, the system only
checks for the availability of a new firmware version and, if there is one, it
displays it. The firmware is not updated until the Automatically install
update check box is selected.
3. Select or clear the Automatically install update check box.
The availability of a new firmware version is checked. If a new firmware version is
available, it is uploaded to the telephone and the telephone is restarted.
Further steps:
– After a firmware update you usually require a new version of the instructions. You will find up-
to-date instructions on the Internet (see www.auerswald.de).
Switches on the check for availability of a new firmware version.
Switches off the check for availability of a new firmware version.
Switches on automatic update.
Switches off automatic update.