Operation Manual

650 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Service and Maintenance
Update and Provisioning
Configuration via SIP Messages
The LEDs on the loudspeaker and Message key begin to flash green quickly for
approximately 4 seconds.
After that the LEDs flash more slowly for approximately 4 seconds.
4. As soon as the LEDs start flashing more slowly, release the hook key and the
query key.
5. Open the configuration manager.
6. Click onSelect file.
A file selection dialogue opens.
7. Select the required file (*.rom) and then click Open (this text varies according to which
operating system is in use).
8. Click Upload.
As soon as the firmware is installed in the telephone, a new screen opens.
9. To activate the new firmware, click Reboot.
The telephone is restarted.
Configuration via SIP Messages
You can configure the telephone via incoming SIP messages. Apart from the configuration of
the telephone, other tasks, for example the configuration of programmable function keys and
touch function key, can also be carried out centrally by a system administrator.
In order to configure the telephone via SIP messages, you need to switch on configuration via
SIP messages and configure a configuration server in the whitelist for configuration via SIP
messages.
Note: You will find further information about configuration via SIP messages
on the Internet (see www.auerswald.de/service under Developer.)
Switching Configuration via SIP Messages On/Off
You can switch configuration via SIP messages on and off as follows:
• Using the configuration manager