Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 75
Introduction to the Configuration Manager
Configuration Manager
Opening the Configuration Manager
– You need to know the telephone's IP address (you can check it on the telephone by selecting
Apps > Settings > Network > Network > IP address)
– Existing network connection between the PC and the system telephone
1. Start a browser (e.g. Mozilla Firefox).
2. Enter the IP address of the telephone in the address field of the browser (for example,
http://192.168.178.4).
3. Under Username, enter the internal telephone number of the telephone.
4. Under Password enter the associated User password (8-32 characters).
Note: If no user password has been entered in the PBX, leave this field
empty.
5. Click OK.
The configuration manager opens.
Opening the Configuration Manager when Operating as a Standard VoIP Telephone
Requirements:
– A PC meeting the minimum requirements (see chapter Important Information > Minimum
Requirements PC)
– Existing network connection between the PC and the telephone
– You need to know the telephone's IP address (you can check it on the telephone by selecting
Apps > Settings > Network > Network > IP address)
1. Start a browser (e.g. Mozilla Firefox).
2. Enter the IP address of the telephone in the address field of the browser (for example,
http://192.168.178.4).
The login window opens.
Note: If you start the configuration manager for the first time, a dialogue box
opens in the first step. This is where you specify the user name and the user
password. Enter the required data (32 characters, letters and numbers).
3. Under Username, enter the username of the telephone.
4. Under Password, enter the user password.