Operation Manual

82 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Introduction to the Configuration Manager
Configuration Manager
Entering a Password for the Configuration Manager (SIP Account)
Using the Configuration Manager to Enter the User Name for the Configuration Manager
Requirements:
– The telephone is not a system telephone in an Auerswald PBX
1. Open the Settings > Auerswald > Configuration Manager screen.
2. Enter the username in the Username entry field under User. Possible entries:
Further steps:
– Save your settings before you leave the screen.
Using the Telephone to Enter User Names for the Configuration Manager
Requirements:
– The telephone is not a system telephone in an Auerswald PBX
1. Tap on Apps > Settings > Auerswald > More > Configuration manager.
2. Tap on Username and enter the username in the entry field. Possible entries:
3. Tap on OK.
Entering a Password for the Configuration Manager (SIP Account)
Important: If operated as a system telephone on an Auerswald PBX, the
PBX specifies the password for the Configuration manager. The password
matches the password you input in the PBX. The password cannot be
entered manually.
You must enter it as follows:
• Using the configuration manager
• Using the telephone
Up to 64 digits
Numbers and characters
Up to 64 digits
Numbers and characters