Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 95
Telephoning
Call-Waiting Calls
Accepting a Call-Waiting Call
– Call waiting must be enabled
If a call-waiting call is signalled, proceed as described below.
• Tap on .
The caller receives a busy signal, assuming no other telephones are called
(for example, in a group call).
Accepting a Call-Waiting Call
Requirements:
– Call waiting must be enabled
If a call-waiting call is signalled, proceed as described below.
• Tap on the caller's business card or tap on .
You will be connected with the caller. Your previous call partner hears the on-hold
music.
Note: If you first hang up the receiver to end the current call, your telephone
will ring and you can accept the incoming call as you would normally.
Forwarding a Call-Waiting Call
Requirements:
– Call waiting must be enabled
If a call-waiting call is signalled, proceed as described below.
1. Tap on .
2. Enter the destination number or select the required VoIP account and telephone
number in the selection window.