Operation Manual

96 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Telephoning
Call-Waiting Calls
Switching Off the Call-Waiting Tone
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. In the factory settings, the PBX's exchange line access
number is "0", but it can be changed in some PBXs (refer to the instructions
for the PBX).
3. Tap on .
The subscriber is called.
Note: If the destination number is saved on the programmable function key
(speed dialling key), you can forward the call by simply pressing this key and
then tapping on . You no longer need to select the function in advance
via the display.
Switching Off the Call-Waiting Tone
Requirements:
– Call waiting must be enabled
If a call-waiting call is signalled, proceed as described below.
• Tap on .
The second call will continue to try to get through and you can accept it at any time.