Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 99
Telephoning
Outgoing Calls
Initiating an External Call with Calling Line Identity Restriction
You can make corrections, if necessary, while entering the telephone
number.
2. Pick up the receiver or tap on .
Note: If you would like to exit dial preparation without dialling the entered
telephone number, tap on .
Initiating an External Call with Calling Line Identity Restriction
Requirements:
– CLIR 2 service feature (case by case suppression of the telephone number display) activated
by the network provider)
– Calling number presentation must be enabled on the PBX
1. Pick up the receiver or tap on .
2. Tap on .
The display will show to indicate that Calling Line Identity Restriction has been
enabled.
3. Dial a telephone number (an external telephone number with an exchange line
access number).
Once you have finished dialling the telephone number, the subscriber will be called.
Calling Line Identity Restriction will be deactivated as soon as you have ended the
call.
Options for Unsuccessful Calls
The following options are available for unsuccessful calls: