Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 139
Contacts and Telephone Number Lists
Call Log
Dialling from the Call Log
Dialling from the Call Log
You can dial a telephone number from the call log as follows:
• Using the telephone
1. Tap on the symbol Call log.
The call log opens.
Note: If you pick up the receiver while the call log is open, the most recently
active telephone number will be dialled immediately.
2. You can either dial the telephone number without changing it or edit the number
before dialling:
• Dial the telephone number without changes: Tap on next to the required entry.
Or touch and hold the required entry and then tap on Call <telephone number>.
• Edit telephone number before dialling: Touch and hold the required entry and then
tap on Edit No before call. Make the required changes in the dial preparation.
Then lift the receiver or tap on .
The subscriber is called.
Note: If you want to exit the call log without dialling a telephone number,
press the back key.
Deleting Entries from the Call Log
You delete an entry from the call log as follows:
• Using the telephone
1. Tap on the symbol Call log.
The call log opens.
2. Touch and hold the required entry and then tap on Remove from call log.