Operation Manual

150 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Call Waiting
Configuring and Operating a Function Key for Call Waiting
4. Tap on Execute.
Configuring and Operating a Function Key for Call Waiting
Press the key to switch call waiting on or off or to switch it over.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for call waiting as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Call Waiting
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
switch on: Enables the audible signal.
switch off: Disables the audible signal.
LED signalling on the key:
green Call waiting is switched on and all the settings assigned to the key match up.
yellow Call waiting is switched on but at least one of the settings assigned to the key
does not match.
Off Call waiting is switched off.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.