Operation Manual

178 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Targeted Exchange Line Access (System Telephone)
Configuring and Operating a Function Key for Targeted Exchange Line Access
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: Exchange line
• Functions sorted by group: Exchanges / lines > Exchange line
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the required account.
7. In the MSN entry field, enter the external telephone number that you want to transfer
during targeted exchange line access (without an exchange line access number and
without a prefix). Possible entries:
8. Tap on Assign.
9. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
Up to 40 digits
Numbers