Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 183
Functions
Groups (System Telephone)
Configuring and Operating a Function Key for the Group Function
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Call direction list field, select one of the following options:
8. In the Account list field, select the system telephony account.
9. In the Group entry field, enter the group telephone number.
10. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– Controlling of the PBX via telephone permission assigned in the PBX
Up to 64 digits
Numbers and characters
toggle log state: press this key to log the telephone in or out, depending on
current status.
login: Press the key to log the telephone into the group.
Logout: Press the key to log the telephone out of the group.
outgoing: Press the key to switch on the "outgoing" call type.
incoming: Press the key to switch on the "incoming" call type.
incoming & outgoing: Press the key to switch on the "incoming & outgoing"
call type.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.