Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 191
Functions
Headset Operation
Switching Headset Operation On/Off
Headset Operation
A headset enables you to participate in calls without actually holding the receiver. This is a very
useful feature, especially in certain professional areas (for example, in a call centre).
The COMfortel 1400 IP can be used with corded headsets. The COMfortel 2600/3600 IP can
be used with corded headsets and with cordless headsets with DHSG interfaces, for example,
from Auerswald, Jabra or Plantronics.
Switching Headset Operation On/Off
If headset operation is switched on, press the Hook key to initiate or end a headset call. If
headset operation is switched off, press the Hook key to initiate or end a call without the need
to pick up the receiver (hands-free calling).
You can switch headset operation on or off as follows:
• Using the telephone
Requirements:
– Connected Headset
To switch headset operation on or off, press the function key that has been configured for the
headset.
Alternatively, proceed as described below.
1. Tap on Apps > Functions > Headset.
2. In the Operation list field, select one of the following options:
3. In the Auto-accept list field, select one of the following options:
switch on: Switches headset operation on.
switch off: Switches headset operation off.
switch off: Switches off automatic call acceptance when headset operation is
switched on.
switch on: Switches on automatic call acceptance when headset operation is
switched on.
switch on (play tone): Switches on automatic call acceptance (with attention
tone) when headset operation is switched on.