Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 207
Functions
InterCom OneWay/Speakerphone
Configuring and Operating a Function Key for InterCom permission
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
7. In the Permission level list field, select one of the following options:
Further steps:
– Save your settings before you leave the screen.
Requirements for using the function:
– Controlling of the PBX via telephone permission assigned in the PBX
Using the Telephone to Configure a Function Key for InterCom Permission
1. Tap on Apps > Function keys.
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap on InterCom permission.
The current settings for assigning the key are shown on the display.
toggle: Press the key to switch InterCom permission on or off depending on
the status.
switch on: Press the key to enable InterCom permission.
switch off: Press the key to disable InterCom permission.
User: The function key can be changed by users, sub-administrators and
administrators.
Sub-administrator: The function key can only be changed by sub-adminis-
trators and administrators.
Administrator: The function key can only be changed by administrators.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.