Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 215
Functions
Macro Function
Configuring and Operating a Function Key for the Macro Function
Notes:
The Macro function fills both key levels. If one level has a macro assigned
to it, the other level is also automatically filled with an empty macro.
Both macros can later be processed and executed independently of each
other.
If you delete a macro from one key level, the macro is automatically deleted
from the other key level.
4. In the list field next to the function key that you would like to define, select the Macro
function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Account list field, select the required account.
7. Enter the macro in the Macro entry field. Possible entries:
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
Up to 100 characters for a maximum of 10 keys, up to 40 characters for additional
keys
The following commands:
Z [number
sequence]:
Number sequence selection including * and #
W [digits 1-5]: Waiting time/pause time of 1-5 seconds
H Hang-up/pick-up with the hook key
C Wait for a connection
Lo The LED next to the function key switches off
Lr The LED next to the function key switches on (red)