Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 241
Functions
Call Forwarding
Configuring and Operating a Function Key for Call Forwarding for Subscribers
6. In the Operation list field, select one of the following options:
7. In the Forwarding type list field, select one of the following options:
8. In the Account list field, select the required account.
9. Select the call forwarding destination:
• Manual entry: Enter the destination number in the Forwarding destination entry
field. Possible entries:
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number (exception: selected account publ. exchange).
• Selection: Tap on and select the destination number based on its name.
10. Tap on Assign.
11. Tap on Exit.
Requirements for using the function:
–for in-house destination numbers: Telephone must be connected to a PBX.
Using the Configuration Manager to Configure a Function Key for Switching Off All Call
Forwarding for Subscribers
1. Open the Apps > Function keys screen.
toggle: Press the key to switch call forwarding for subscribers on or off.
switch on: Press the key to switch on call forwarding for subscribers.
switch off: Press the key to switch off call forwarding for subscribers.
unconditional: Assigns the "call forwarding (unconditional)" function to a key
for the subscriber.
on busy: Assigns the "call forwarding (on busy)" function to a key for the
subscriber.
not responding: Assigns the "call forwarding (if not responding)" function to a
key for the subscriber.
Up to 40 digits
Numbers and the characters * and #