Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 275
Functions
Door Function (System Telephone)
Configuring and Operating a Function Key for the Door Function
2. Press the function key you want to define.
Note: The LEDs of the function keys that are already filled on one level light
up yellow. If a function key is assigned on both levels, the LED is red.
3. Select one of the following options:
The list of available functions is displayed.
4. Tap:
• Functions listed alphabetically: Door function
• Functions sorted by group: Door functions/Relays > Door functions
The current settings for assigning the key are shown on the display.
5. In the Description entry field, enter a description for the key. Possible entries:
Note: The key description is used for printing the label and in the display.
6. In the Operation list field, select one of the following options:
Note: The Light on door function switches on the 3rd relay of the corre-
sponding door station separately at the time configured in the PBX.
7. Select the door:
• Manual entry: Enter a telephone number in the Door number entry field.
• Selection: Tap on and select a door.
8. Tap on Assign.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.
Up to 64 digits
Numbers and characters
open: Press the key to open the door.
switch on light: Press the key to switch the stairwell light on.
open door - switch on light: Press the key to open the door and switch the
stairwell light on.
decide each time a key is pressed: Press the key to open the dialogue in
which you select the option.