Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 281
Functions
Waiting Field Function (System Telephone)
Configuring and Operating Function Keys for a Shared Line
Note: If you press the key to place a caller in the waiting field, the LED next
to the key lights up yellow. If a caller is placed in the waiting field either
automatically or by another waiting field reception, the LED then lights up red.
You can configure function keys for a shared line as follows:
• Using the configuration manager
• Using the telephone
Note: The function can only be set up on a programmable function key that
has an LED (not on a touch function key).
Using the Configuration Manager to Configure a Function Key for a Shared Line
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
Note: The Shared Line function fills both key levels. If one level is filled, the
other levels are also filled automatically.
4. Select the Shared line function in the list field next to the function key you would like
to define.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.