Operation Manual

284 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Waiting Field Function (System Telephone)
Configuring and Operating Function Key for Switching Waiting Field Reception On/Off
• SIP account: Enter the telephone number of the account in the MSN/URL entry
field. Possible entries:
Important: You cannot assign calls via the DDI for SIP trunking accounts and
ISDN PBX connections (PTP). Do not enter a value in the MSN/URL entry
field. The calls are assigned via the account.
9. Tap on Assign.
10. Tap on Exit.
Requirements for using the function:
– The telephone is a system telephone in an Auerswald PBX
– The telephone has been selected in the PBX as a waiting field reception
Configuring and Operating Function Key for Switching Waiting Field Reception
On/Off
Press the key while in the telephone's idle state (sleep) to switch the waiting field reception on
or off or switch it over.
In addition, when functions are assigned on the first key level, the status of the function is
indicated by the corresponding LED.
You can configure a function key for switching waiting field reception on and off as follows:
• Using the configuration manager
• Using the telephone
Max. 40 digits
Numbers
LED signalling on the key:
green The waiting field reception is enabled.
off The waiting field reception is disabled.