Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 289
Functions
Speed Dialling
Configuring and Operating a Function Key for Speed Dialling
Configuring and Operating a Function Key for Speed Dialling
Press the key while the telephone is in the idle state to transfer the telephone number saved in
the key to dial preparation (can be used as an additional number).
Exception: If the saved telephone number is an internal phone number, and is currently being
called, you will pick up this call.
After picking up the receiver, press the key to dial the telephone number saved in the key.
Press the key during a call to put the active call partner on hold and to dial the telephone
number saved in the key.
In addition, when a subscriber or a group telephone number is defined on the first key level, the
status of the subscriber or group is indicated by the corresponding LED.
LED signalling on the key (when assigned to an internal subscriber telephone
number):
red A call is in progress on the internal telephone. Press the key to initiate a call
pick-up.
red (blinking) The internal telephone is currently being called or a call is waiting on that
telephone. Press the key to initiate a pick-up.
green The internal telephone is configured as a boss telephone.
green
(blinking)
A call is being made from the internal telephone and the call was not
accepted.
yellow The internal telephone is unreachable (do-not-disturb or subscriber call
forwarding has been configured).
yellow
(blinking)
Only when there is an internal VoIP subscriber and display of the registration
status is switched on: The telephone is not registered on the PBX.
off The internal telephone is available. Press the key to place a call.
LED signalling on the key (when defined with an internal group telephone number):
red Calls are in progress on all logged-in telephones or no telephone in the group
is logged in.
red (blinking) A logged in telephone is currently being called or a call is waiting on that
telephone. Press the key to initiate a pick-up.
yellow The group is not available (call forwarding is configured for the group).
off The group is available. Press the key to place a call.