Operation Manual

290 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Functions
Speed Dialling
Configuring and Operating a Function Key for Speed Dialling
Note: You cannot run this function if the account stored for a function key has
been deleted. When you press the key, a dialogue opens, in which you can
assign a new account to the key. Tap on New accountnext to the Account ID,
select a new account from the list field and then tap on Assign.
You can configure a function key for speed dialling as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Configure a Function Key for Speed Dialling
1. Open the Apps > Function keys screen.
2. Only COMfortel 2600/3600 IP: In the Key selection list field, select the key group
whose keys you would like to define.
Note: Keys 16 to 105 are not available until you connect COMfortel
Xtension300 key extension modules (not included in the scope of delivery) to
the telephone.
3. Click one of the following tabs:
4. In the list field next to the function key that you would like to define, select the Speed
dialling function.
Note: To change the settings for a function key that already has a function
assigned to it, click on that key.
The current settings for the key assignment are shown in the display.
5. In the Description entry field, enter a description for the key. Possible entries:
LED signalling on the key (when defined with an external telephone number):
green
(blinking)
A call was made from the external subscriber's telephone and the call was not
accepted (assuming the external number is transferred).
Level 1: Keys are assigned on the first key level.
Level 2: Keys are assigned on the second key level.