Operation Manual

COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015 293

Functions

Speed Dialling

Switching the Display of the Registration Status On/Off

If the registration status display is switched on, the individual registration status of the

subscribers is shown by the LEDs of the speed dialling keys assigned to internal VoIP

subscribers. If a particular VoIP subscriber is not registered at the PBX, their LED will blink

yellow.

You can switch the registration status display on or off as follows:

• Using the configuration manager

• Using the telephone

Using the Configuration Manager to Switch the Display of the Registration Status On/Off

1. Open the Settings > Device > Display screen.

2. Select or clear the Registration status for VoIP subscribers check box.

Further steps:

– Save your settings before you leave the screen.

Using the Telephone to Switch the Display of the Registration Status On/Off

1. Tap on Apps > Settings > Display > More.

2. Select or clear the Registration status display for VoIP subscribers check box

under LED settings.

Switches the display of the registration status on.

Switches the display of the registration status off.

Switches the display of the registration status on.

Switches the display of the registration status off.