Operation Manual

302 COMfortel 1400IP/2600IP/3600IP - Firmware V2.2G - Operation and Configuration V03 07/2015
Local Answering Machine
Readiness
Switching Readiness On/Off
Readiness
To enable the answering machine to take calls and record messages, readiness must be
switched on and the SD card must be inserted.
If readiness and call waiting are switched on, the answering machine can also take and record
a second incoming call at the same time as the current call.
Note: If a voice mailbox is assigned to the telephone as a system telephone
on an Auerswald PBX, this voice mailbox accepts all the calls received from
the system telephone account and takes precedence over the local
answering machine. If calls come in over a different account, the local
answering machine accepts them according to its configuration.
Switching Readiness On/Off
Notes:
Even when readiness is switched on, the system will only accept calls of the
types for which call acceptance has been enabled.
You can also switch readiness on and off remotely.
You can switch readiness on or off as follows:
• Using the configuration manager
• Using the telephone
Using the Configuration Manager to Switch Readiness On/Off
Requirements:
– Answering machine (optional, see chapter Important Information > Product Details)
1. Open the Settings > Auerswald > Answering machine > Answering machine
screen.
2. Select or clear the Voicemail check box.
Enables readiness.
Disables readiness.